Of course! I can walk through it right here. For example, I have the attached file, which is also uploaded to GDTF share under the Fiilex Manufacturer Page (Motoquad v.9.3). Where the issue has been occurring is that at this point. There are 9 modes available, and the goal is to add a 10th, in this case a mode with the following parameters:
Channel 1: Intensity
Channel 2: CTC
Channel 3: Tint
Channel 4: Crossfade
Channel 5,6,7,8: AddR, AddG, AddB, AddW
Channel 9: Strobe
Channel (10,11),(12,13),(14,15): 16-bit Pan, Tilt, NoFeature
Channel 16: Control(n)
Channel 17: NoFeature
My Process has been Copy Pasting Channels from the existing 9 modes and adding them into the profile (and adjusting the channel number if necessary). At the point where I begin adding the strobe, the builder seems to slow, and by the time I am at the control channel, there is a severe lag at which point the site says server can not be reached and progress is lost. Yesterday, at posting the message and letting the Save/Upload feature load for 30 minutes was the first time anything successfully saved. Previously, it would just be stuck on the loading screen in perpetuity (to test, left it on overnight).
Let me know if any other details are needed!
Fiilex@MotoQuad@v0.9.3.gdtf