Hi, Is there a problem with the servers? I'm asking because until last week everything could have been found directly in MA3. Now every new upload(from the past week and a half) can't be found. I need to manually download them and import in MA3. It's not a problem, but it was easier to search the fixture directly in MA3.

Ok. Thank you,

I'm testing a build fixture Brother_Brother_and_Sons@Compact_Fresnel_Light_-_Wide_-_Single_Color_5600K@REV0.gdtf in MA3. The fixture is Single Color, but on the Color tab the values for R, G and B show up(they don't work). How can I make them disappear, or I did something wrong when I created the fixture?

But is there another way todo it?

Follow-up question: If I have a setting in my fixture that, when turned "ON," adds 7 channels to all my DMX modes, how can I implement this? Do I need to define DMX modes with this option "ON" and again with this option "OFF" (as shown in the image)?

That is exactly what >I was looking for. Thank you.

Hi, I'm wondering if there is an "IF" function, or something similar for DMX modes and channels. For example: -I have a DMX mode with 3 channels(1-3CH), but depending on the value of 1CH the properties of the next 2 channels change. - 1CH has the value "1" then 2CH has "x" and 3CH has "y" -1CH has the value "2" then 2CH has "m" and 3CH has "n" -1CH has the value "3" then 2CH has "a" and 3CH has "b" ... And so on

I have very different values so I'm going to do the 3 lens option(in the Geometry tab). Thank you for your help.

So I could do it with the "Virtual DMX", but I won't be able to modify the beam angles, outputs, etc. for each step.

If I do it in a virtual way, would it appear as a DMX mode?

Hi, I would like to design the following fixture: (attached), equipped with manual zoom functionality. At each zoom step, I require distinct beam angles, outputs, etc. Could you advise me on how to implement this zoom feature or provide relevant information? Currently, my only idea is to create three lenses, each corresponding to a different zoom step. BBS-CFL1-DS23.pdf

Thanx David, I ran through all the defaults value, and yes they where all wrong, thanx for noticing 🙂

Hi GDTF We are struggling with the GTDF system. How to correctly connect the DMX to the Geometry. And why do we have to connect the DMX mapping/mode to the top level geometry, instead of the diffuser? BBS_Lighting_People@Area_48_Color@0003.gdtf