Paolo.Prolights Posted February 11, 2022 Share Posted February 11, 2022 Hi there, Has anyone used the Effects(n)Adjust(m) attribute successfully? After 2 hours of writing dozens of channel sets in dozens of logical channels divided into master containers under this attribute, I uploaded the file to the share. Today I reopened the file in the builder and found an unpleasant surprise; the Effects(1)Adjust(1) attribute and the Effects(1)Adjust(2) attribute have disappeared with all their contents! In practice, I find the dmx channel with only the associated geometry. By uploading the file to the share, all the content of these channels has been deleted! I tried to do it from scratch with only one logical channel, without master container and only one channel sets but I get the same result, it seems that this attribute is simply not recognized, in fact it is not even present in the Summary tab under the Attributes item. Is not even present in the Summary tab under feature groups beam.beam as I expect it should be as per spec: <Attribute Name = "Effects (n) Adjust (m)" Pretty = "FX (n) Adjust (m)" Feature = "Beam. Beam "/> Thanks for your attention. Best regards. Paolo. Link to comment Share on other sites More sharing options...
Petr Vanek - Robe Posted February 18, 2022 Share Posted February 18, 2022 Thank you @Paolo.Prolights, i can replicate the issue and it has been reported. Cheers P. Link to comment Share on other sites More sharing options...
Paolo.Prolights Posted February 18, 2022 Author Share Posted February 18, 2022 Thank you @Petr Vanek, is the same for VideoEffect(n)Parameter(m). Best regards Paolo 1 Link to comment Share on other sites More sharing options...
Paolo.Prolights Posted June 7, 2022 Author Share Posted June 7, 2022 Hi there, these attributes still not working so build complex fixtures with parameters linked to effects is not possible. How do you suggest to workaroud to build something like the following? ch_1 "Mode Selector": FX: 000-012 Source Emulation : 013-024 CCT: ... HSI: ... ... ----------------------- ch_2 "FX selector": NoFunction: 000-001 (MMC ch_1 - dmx 013-255) FX_1: 002-003 (MMC ch_1 - dmx 000-012) FX_2: 004-005 (MMC ch_1 - dmx 000-012) FX_3: ...... (MMC ch_1 - dmx 000-012) ... ----------------------- ch_3 "Parameter 1": Saturation: 000-255 (MMC ch_2 - dmx 002 - 003) CCT Range: 000-255 (MMC ch_2 - dmx 004-005) .... ----------------------- ch_4 "Parameter 2": Speed: 000-255 (MMC ch_2 - dmx 002-003) ... ------------------------ And like this for 7 parameters. Thanks for your attention. Best regards. Paolo. Link to comment Share on other sites More sharing options...
Petr Vanek - Robe Posted June 14, 2022 Share Posted June 14, 2022 Hi @Paolo.Prolights, sorry about this, i have re-reported it again. P. Link to comment Share on other sites More sharing options...
Petr Vanek - Robe Posted June 25, 2022 Share Posted June 25, 2022 FYI, the issue has been found and is fixed, it will be part of next maintenance release of the builder. 1 Link to comment Share on other sites More sharing options...
trulamila Posted August 10, 2022 Share Posted August 10, 2022 (edited) this is useful information Edited August 10, 2022 by trulamila Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now