Brothers
-
Posts
16 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Brothers
-
-
Hi,
Is there a problem with the servers? I'm asking because until last week everything could have been found directly in MA3. Now every new upload(from the past week and a half) can't be found. I need to manually download them and import in MA3. It's not a problem, but it was easier to search the fixture directly in MA3.
-
2
-
-
Ok. Thank you,
-
I'm testing a build fixture Brother_Brother_and_Sons@Compact_Fresnel_Light_-_Wide_-_Single_Color_5600K@REV0.gdtf in MA3. The fixture is Single Color, but on the Color tab the values for R, G and B show up(they don't work).
How can I make them disappear, or I did something wrong when I created the fixture?
-
15 hours ago, Petr Vanek - Robe said:
Yes. Persistent, not DMX related settings can currently be described via DMX modes.
But is there another way todo it?
-
13 hours ago, Petr Vanek - Robe said:
Hello,
You are looking for Relations:
https://gdtf-share.com/help/en/help/gdtf_how_to/key_handle_mode_dependencies.html
Follow-up question: If I have a setting in my fixture that, when turned "ON," adds 7 channels to all my DMX modes, how can I implement this?
Do I need to define DMX modes with this option "ON" and again with this option "OFF" (as shown in the image)?
-
That is exactly what >I was looking for. Thank you.
-
Hi,
I'm wondering if there is an "IF" function, or something similar for DMX modes and channels.
For example:
-I have a DMX mode with 3 channels(1-3CH), but depending on the value of 1CH the properties of the next 2 channels change.
- 1CH has the value "1" then 2CH has "x" and 3CH has "y"
-1CH has the value "2" then 2CH has "m" and 3CH has "n"
-1CH has the value "3" then 2CH has "a" and 3CH has "b"
...
And so on
-
13 minutes ago, Petr Vanek - Robe said:
You can modify the beam angles, that is the function of Zoom. If each lense has very different Lumen values, then you would use different files. If the lumen output is same, you could just use the modes or virtual zoom.
I have very different values so I'm going to do the 3 lens option(in the Geometry tab).
Thank you for your help.
-
3 minutes ago, Petr Vanek - Robe said:
No, this info would be for visualizer only. You could do it also by DMX mode, yes, then it would be more visible to the customer and also available in the visualization...
So I could do it with the "Virtual DMX", but I won't be able to modify the beam angles, outputs, etc. for each step.
-
If I do it in a virtual way, would it appear as a DMX mode?
-
Hi,
I would like to design the following fixture: (attached), equipped with manual zoom functionality. At each zoom step, I require distinct beam angles, outputs, etc. Could you advise me on how to implement this zoom feature or provide relevant information? Currently, my only idea is to create three lenses, each corresponding to a different zoom step.
-
Thanx David, I ran through all the defaults value, and yes they where all wrong, thanx for noticing 🙂
-
Hi GDTF
We are struggling with the GTDF system.
How to correctly connect the DMX to the Geometry.
And why do we have to connect the DMX mapping/mode to the top level geometry, instead of the diffuser?
Saving errors
in General
Posted
Hi.
I'm having some errors when I save a new fixture. I save the file like in the 1st picture:
When I'm opening it again it gives me the following error:
And when I check the same channel it looks like this:
It happens for all "StrobeModeStrobe" and also for "Tint". After I do it again and save it a 2nd time it works fine. It happened for 9 fixtures since yesterday.