Ldelgado Posted November 20, 2023 Share Posted November 20, 2023 Hello GDTF Pro's, It seem I have full control of my fixture but I only see a grid and the Beam source. I have visually copied setting from a known working fixture but still have no luck after 2 days of troubleshooting. Is this a GrandMA 3 issue or a GDTF mistake I'm making? I have seen this before on other fixtures as well. FYI This is my first fixture I have built. Any help? Vari-Lite@VLZ_Profile@11-20_121p.gdtf Link to comment Share on other sites More sharing options...
Ldelgado Posted November 20, 2023 Author Share Posted November 20, 2023 Just now, Ldelgado said: Hello GDTF Pro's, It seem I have full control of my fixture but I only see a grid and the Beam source. I have visually copied setting from a known working fixture but still have no luck after 2 days of troubleshooting. Is this a GrandMA 3 issue or a GDTF mistake I'm making? I have seen this before on other fixtures as well. FYI This is my first fixture I have built. Any help? Vari-Lite@VLZ_Profile@11-20_121p.gdtf 1.66 MB · 0 downloads Link to comment Share on other sites More sharing options...
Petr Vanek - Robe Posted November 21, 2023 Share Posted November 21, 2023 Hello, your Iris channel sets are always setting Iris to closed: Make sure to edit it to fix it. I would also adjust the Channel Function's physical to match the sets: Hope this helps Petr Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now