Höckler Posted February 6 Share Posted February 6 Hi I am trying to set up the Eurolite "LED Strobe SMD Pro 132 DMX RGB" fixture in 4 channel mode. The channel 3 has diffrent colour presets. I have created a wheel and made a slot for each channel colour preset. The "ColorMacro(n)" attribute describes that the individual colors can be selected for the channel sets when the corresponding wheel slot is selected. However, I only have the option of defining Physical From and To for the channel sets which is only a numeric value. I cannot find an option to select a wheel here. At the "Color(n)" attribute, I can select the wheel as usual. However, I don't want this channel to react like a colour wheel in the visualisation, but I would like to be able to select the predefined colors using channel sets. How can a wheel be selected for the "ColourMacro(n)" attribute? Thank you in advance for your help. Best Regards Lukas Link to comment Share on other sites More sharing options...
Petr Vanek - Robe Posted February 7 Share Posted February 7 Hello, you cannot link the Wheel from the "fast shortcut" of the Channel Function, but you can add it if you open the full modal dialog editing the channel function properties: This then allows you to select gobos for each channel set: Depending on the use case, you will have to test if the software of your choice visualizes ColorMacro... Hope this helps Cheers Petr Link to comment Share on other sites More sharing options...
Höckler Posted February 7 Author Share Posted February 7 Hi Petr Thank you very much for your fast Reply and Help. Now it works as expected. Greetings Lukas 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now