Conversion GDTF for GrandMa 2

[LJFred]

Hello

Sorry for my english because is bad. I'm French.

I have a problem with my fixture (https://fixtureshare.malighting.com/gma2.php?page=home&manu=Starway&fix=ServoBWS 20R&mode=Mode 30 canaux&rev=35605) for Starway BWS 20R.

I used GDTF builder for make this fixture and i have uploaded this with fxture share convert for GrandMa 2. My problem is 3D model because it is not work. The 3D work on GrandMA 3 3D.

Thank you if you can help me.

Starway@ServoBWS_20R@Mode_30_canaux@LjFredl73_rev_200412.xml

Starway@Servo BWS 20R@LJFred 200412.gdtf

210160_SERVOBEAM20R _FR.pdf

[mgeasey@clearallvisualsllc.com]

Hey @LJFred,

Sorry about the delayed response. It looks like what is causing the error is the way that the geometry is built with the rules that MA2 wants. Here's a screenshot of how I adjusted it to fix it for MA2, and in theory this should be fine for MA3. From what I understand, the Converter is going through the tree and building it from the top down for the MA2 rules. 

I hope this helps!

  

 

Cheers!

MattG

 

[LJFred]

MattG

Thank you for your help. 

[rolf vom berge]

Hello @mgeasey@clearallvisualsllc.com,

I don´t really understand what you´re doing to solve this problem. I converted a file for Martin MAC Aura XIP  to grandma2 but 3d doesn´t work well (screenshot). Could you explain what you´re exactly adjusting