melchsteffen Posted June 10, 2020 Share Posted June 10, 2020 Hey Guys, I am building a GDTF for the Stairville Outdoor Stage PAR 12x4W Quad. In its 8CH-Mode it has an Chase Mode. Do you know how to integrade that? Link to comment Share on other sites More sharing options...
hantoo Posted June 10, 2020 Share Posted June 10, 2020 From what I've seen on other GDTF Descriptions, where ever you have a channel which has more than one linear value (e.g. colour presets, or chase modes) - you add a channel set. So you define a logical channel, and a channel function, then at the bottom right of the builder (you might have to scroll down on the page), you have the option to add a channel set. This is taken straight from the Robe Robin T1 as an example : <LogicalChannel Attribute="AnimationWheel1SelectEffects" DMXChangeTimeLimit="0.000000" Master="None" MibFade="0.000000" Snap="No"> <ChannelFunction Attribute="AnimationWheel1SelectEffects" DMXFrom="0/1" Name="AnimationWheel1SelectEffects" OriginalAttribute="Effect wheel animations" PhysicalFrom="0.000000" PhysicalTo="1.000000" RealFade="0.000000"> <ChannelSet DMXFrom="0/1" Name="No animation" PhysicalFrom="0.000000" PhysicalTo="1.000000" WheelSlotIndex="0"/> <ChannelSet DMXFrom="8/1" Name="Macro 1 (Focus=94)" PhysicalFrom="0.000000" PhysicalTo="1.000000" WheelSlotIndex="0"/> <ChannelSet DMXFrom="10/1" Name="Macro 2 (Focus=84)" PhysicalFrom="0.000000" PhysicalTo="1.000000" WheelSlotIndex="0"/> <ChannelSet DMXFrom="12/1" Name="Macro 3 (Focus=87)" PhysicalFrom="0.000000" PhysicalTo="1.000000" WheelSlotIndex="0"/> <ChannelSet DMXFrom="14/1" Name="Macro 4 (Focus=69)" PhysicalFrom="0.000000" PhysicalTo="1.000000" WheelSlotIndex="0"/> <ChannelSet DMXFrom="16/1" Name="Macro 5 (Focus=82)" PhysicalFrom="0.000000" PhysicalTo="1.000000" WheelSlotIndex="0"/> <ChannelSet DMXFrom="18/1" Name="Macro 6 (Focus=82)" PhysicalFrom="0.000000" PhysicalTo="1.000000" WheelSlotIndex="0"/> <ChannelSet DMXFrom="20/1" Name="Macro 7 (Focus=72)" PhysicalFrom="0.000000" PhysicalTo="1.000000" WheelSlotIndex="0"/> <ChannelSet DMXFrom="22/1" Name="Macro 8 (Focus=86)" PhysicalFrom="0.000000" PhysicalTo="1.000000" WheelSlotIndex="0"/> <ChannelSet DMXFrom="24/1" Name="Macro 9 (Focus=78)" PhysicalFrom="0.000000" PhysicalTo="1.000000" WheelSlotIndex="0"/> <ChannelSet DMXFrom="26/1" Name="Macro 10 (Focus=102)" PhysicalFrom="0.000000" PhysicalTo="1.000000" WheelSlotIndex="0"/> <ChannelSet DMXFrom="28/1" Name="Reserved" PhysicalFrom="0.000000" PhysicalTo="1.000000" WheelSlotIndex="0"/> </ChannelFunction> </LogicalChannel> You can see that in a DMX channel that had multiple options, a channel set is used to define the different modes. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now