Jump to content

GDTF Forum

Recommended Posts

From what I've seen on other GDTF Descriptions, where ever you have a channel which has more than one linear value (e.g. colour presets, or chase modes) - you add a channel set.

So you define a logical channel, and a channel function, then at the bottom right of the builder (you might have to scroll down on the page), you have the option to add a channel set.

 

This is taken straight from the Robe Robin T1 as an example :

<LogicalChannel Attribute="AnimationWheel1SelectEffects" DMXChangeTimeLimit="0.000000" Master="None" MibFade="0.000000" Snap="No">
       <ChannelFunction Attribute="AnimationWheel1SelectEffects" DMXFrom="0/1" Name="AnimationWheel1SelectEffects" OriginalAttribute="Effect wheel animations" PhysicalFrom="0.000000" PhysicalTo="1.000000" RealFade="0.000000">
                <ChannelSet DMXFrom="0/1" Name="No animation" PhysicalFrom="0.000000" PhysicalTo="1.000000" WheelSlotIndex="0"/>
                <ChannelSet DMXFrom="8/1" Name="Macro 1 (Focus=94)" PhysicalFrom="0.000000" PhysicalTo="1.000000" WheelSlotIndex="0"/>
                <ChannelSet DMXFrom="10/1" Name="Macro 2 (Focus=84)" PhysicalFrom="0.000000" PhysicalTo="1.000000" WheelSlotIndex="0"/>
                <ChannelSet DMXFrom="12/1" Name="Macro 3 (Focus=87)" PhysicalFrom="0.000000" PhysicalTo="1.000000" WheelSlotIndex="0"/>
                <ChannelSet DMXFrom="14/1" Name="Macro 4 (Focus=69)" PhysicalFrom="0.000000" PhysicalTo="1.000000" WheelSlotIndex="0"/>
                <ChannelSet DMXFrom="16/1" Name="Macro 5 (Focus=82)" PhysicalFrom="0.000000" PhysicalTo="1.000000" WheelSlotIndex="0"/>
                <ChannelSet DMXFrom="18/1" Name="Macro 6 (Focus=82)" PhysicalFrom="0.000000" PhysicalTo="1.000000" WheelSlotIndex="0"/>
                <ChannelSet DMXFrom="20/1" Name="Macro 7 (Focus=72)" PhysicalFrom="0.000000" PhysicalTo="1.000000" WheelSlotIndex="0"/>
                <ChannelSet DMXFrom="22/1" Name="Macro 8 (Focus=86)" PhysicalFrom="0.000000" PhysicalTo="1.000000" WheelSlotIndex="0"/>
                <ChannelSet DMXFrom="24/1" Name="Macro 9 (Focus=78)" PhysicalFrom="0.000000" PhysicalTo="1.000000" WheelSlotIndex="0"/>
                <ChannelSet DMXFrom="26/1" Name="Macro 10 (Focus=102)" PhysicalFrom="0.000000" PhysicalTo="1.000000" WheelSlotIndex="0"/>
                <ChannelSet DMXFrom="28/1" Name="Reserved" PhysicalFrom="0.000000" PhysicalTo="1.000000" WheelSlotIndex="0"/>
        </ChannelFunction>
 </LogicalChannel>

You can see that in a DMX channel that had multiple options, a channel set is used to define the different modes.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.